Syringe uploading machine
1. Introduction
The function of the plastic syringe elevator is to lift the syringe to be filled, which is manually poured into the syringe storage hopper, assembled with the syringe piston and push rod, to the entry of the plastic syringe filling and capping machine after the syringe is automatically arranged by the pipe management machine through the sanitary scraper belt.
2. Main Technical Parameters
(1) 2-phase power supply voltage: 220 V
(2) Power of the whole machine: 0.9 kw
(3) Syringe lifting speed 30-180 pieces / min, speed adjustable
(4) Install tube inspection sensor, and make up the tube automatically
(5) PLC programming
(6) Touch screen control
(7) Noise ≤ 40 dB
(8) 304 rack
(9) Plexiglass isolation window with door opening and shutdown protection
(10) Weight: 380 kg
Syringe unscrambler machine
1.Main Technical Parameters
(1) 2-phase power supply voltage: 220 V
(2) Power of the whole machine: 0.9 kw
(3) Syringe lifting speed 30-180 pieces / min, speed adjustable
(4) equipped with inspection sensor, and make up the tube automatically
(5) PLC programming
(6) Touch screen control
(7) Noise ≤ 40 dB
(8) 304 rack
(9) Plexiglass isolation window with door opening and shutdown protection
(10) Weight: 380 kg
Syringe filling and capping machine
1.
Introduction
The function of the filling and capping machine is to accept the assembled syringe to be filled. The syringe tube slide plate to be filled is arranged in order, and the syringe is vertically suspended into the feeding tube chute. The feeding tube manipulator is sent to the station manipulator on the station tray. The station manipulator grasps the syringe and rotates to the turnover station with the station tray. The station manipulator rotates 180 ° to make the syringe needle mouth upward, The station disk continues to rotate, the station manipulator drives the syringe with the injection needle mouth upward to the filling station, the injection needle valve goes down to cooperate with the injection needle mouth of the syringe, the feeding pump goes up and the feeding valve opens to fill the liquid into the syringe, and under the pressure of the liquid, the piston push rod of the syringe goes down until the filling of the liquid is completed; the station disk continues to rotate to the capping station, and the stopper vibrates the disk The cover of the syringe is placed on the needle mouth of the syringe by the capping manipulator; the station disk continues to rotate to the capping station, and the capping manipulator presses the cover firmly to seal the syringe, and the cover is locked with the rotation of the station disk and finally slips out of the discharge chute.
2.
Main Technical Parameters
(1) Power supply voltage: 380V 50Hz
(2) Power of the whole machine: 1.7kw
(3) Stable production capacity: 50 pieces / min 5ml precision 2%
(4) Vibration disc management
(5) Alarm and shutdown if no syringe
(6) Vibrating plate cover
(7) Alarm rate of cover shortage shutdown: 100%
(8) Success rate of capping: ≥ 99%
(9) Compressed air: 0.7MPa
(10) Material contact part 316L material
(11) Ceramic feed pump, ceramic feed valve
(12) 304 rack
(13) The glass isolation window is equipped with door opening and shutdown protection
(14) PLC programming
(15) Touch screen control
(16) Fault stop alarm
(17) Noise ≤ 45 dB
(18) The outline dimension is shown in the figure
(19) Total weight: about 680kg
Syringe labeling machine (option)
1.
Introduction
The plastic syringe labeling machine accepts the syringes sent by the transmission machine, labels the syringes, prints the batch number
2.
Main Technical Parameters
(1) Power supply voltage: 380V, 50Hz
(2) Power: 2KW
(3) Stable production capacity: 45 pieces / min
(4) Rod less rejection rate: 100%
(5) Removal rate without cover: 100%
(6) Labeling pass rate: 99%
(7) Compressed air: 0.7MPa
(8) Fault shutdown alarm
(9) Noise ≤ 45 dB
(10) The overall dimensions are shown in the figure
(11) Wooden packing
(12) Weight: 650 kg
(13) Packing weight: 750 kg
Our Advantages
- Best price of this product due to our strictly control over raw materials and production costs.
- Our company is confident at the product quality. Professional R&D technology team and equipment which keep products quality better and better.
- Factory locates in national new material industrial park where guarantees safe and continuous production.
- More than 15 years chemical production and exporting experience, and good relationship with customs and ship agents, which guarantee fast and safe export.
- Timely after service resolves your worry for international trade.
After Sales Service
1, Equipment installation and debugging
Equipment installation and debugging is one of the important contents of equipment after-sales service, including the correct installation of equipment, line connection, debugging and operation, etc. Our professional engineers will arrive at the site in a timely manner after equipment delivery according to customer needs, install and debug according to installation requirements and specifications, and ensure that the equipment can operate normally.
2, Maintenance and upkeep
The maintenance and upkeep of equipment is also the core content of after-sales service. We will develop corresponding maintenance plans based on the type and characteristics of the equipment, and regularly inspect and maintain the equipment to promptly identify and address any issues, ensuring the stable operation of the equipment.
3, Technical support
We provide comprehensive technical support services, including technical consultation, fault diagnosis, and solution provision during equipment use. Our engineers will provide timely technical support according to the needs of customers, helping them solve problems encountered during equipment use.
4, Customer Training
For customers who purchase new equipment, we provide professional training services to help them familiarize themselves with the usage and operation skills of the equipment, ensuring that they can use the equipment correctly and efficiently, and extending the service life of the equipment.
FAQ
Q: What is your payment terms?
A: We accept all payment terms including TT, LC.
Q: What is your delivery time?
A: Usually we will arrange the delivery within 5 -15 days after the machine is finished.
Q: What is your packing?
A: It depends on the products, we normally use standard package from our factory.
We can also arrange customized packages according to customers' requirements.
Q: What is the validity of the products?
A: We guarantee that the cargoes have Min. 80% shelf life on the delivery date.
Q: How about your after-sale service?
A: We have profession team for loading, as well as the logistics team for documents. Our logistics team will send arrival notice for customers and keeping eyes for their feedback once received our cargoes. If any issue, we will solve it at once and our customers are always long-term partners.
Q: How do you treat quality complaint?
A: First of all, our quality control will reduce the quality problem to near zero. If there is a quality problem caused by us, we will send you free goods for replacement or refund your loss.
Audited Supplier 
){kind=link}